ViewSonic PJ1065 User Manual - Page 25

SPECIFICATIONS Table 12: Specifications Item Product name Panel size Liquid crystal Drive system projector Pixels Lens Lamp Speaker Power supply Power consumption Temperature range Size Weight (mass) 1 RGB IN RGB signal input DVI AUDIO IN VIDEO S-VIDEO Video signal input COMPONENT VIDEO AUDIO RGB OUT Signal output AUDIO OUT Control functions Optional parts CONTROL USB Y CB/PB CR/PR RGB1 DVI RGB2 2 Specification Liquid crystal projector 3.3 cm (1.3 type) TFT active matrix, 1024 × 768 native 786,432 pixels (1024 horizontal × 768 vertical) Zoom lens F = 1.7 - 2.3; f = 49.0 - 64.0 mm 275 W UHB 1.2 W + 1.2 W (stereo) AC 100 - 120 V, 4.7 A / AC 220 - 240 V, 2.0 A 440 W 0 - 35°C (operating) 289 (W) × 144 (H) × 350 (D) mm 6.5 kg Video: Analog 0.7 Vp-p, 75 Ω terminator (positive) H/V. sync.: TTL level (positive/negative) Composite sync.: TTL level D-sub 15-pin shrink jack TMDS, DC: 150-1200 mV / AC: 1.56 Vp-p TTL Level (Positive/Negative) 200m Vrms, 50 kΩ (max. 3.0Vp-p) Stereo mini jack 1.0Vp-p, 75 Ω terminator RCA jack Brightness signal: 1.0 Vp-p, 75 Ω terminator Color signal: 0.286Vp-p (burst signal), 75 Ω terminator Mini DIN 4-pin jack 1.0 Vp-p, 75 Ω Terminator (positive) 0.7 Vp-p, 75 Ω Terminator (positive) 0.7 Vp-p, 75 Ω Terminator (positive) L/MONO 200m Vrms, 50 kΩ (max. 3.0 Vp-p) RCA jack R Video: Analog 0.7 Vp-p, 75 Ω output impedance (positive) H/V. sync.: TTL level (positive/negative) Composite sync.: TTL level D-sub 15-pin shrink jack 200m Vrms, output impedance 1 kΩ (max. 3.0Vp-p) Stereo mini jack D0sub 15-pin shrink plug USB jack (B type) Lamp: PRJ-RLC--002 NOTE: • This specifications are subject to change without notice. ViewSonic PJ1065 23