ViewSonic PJ1158 PJ1158-1 User Guide, English - Page 19
Changing the frequency of remote control signal, About the remote control signal
UPC - 766907232813
View all ViewSonic PJ1158 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Remote control About the remote control signal The remote control works with the projector's remote sensors. This projector has three remote sensors on the front, on the top, and on the back. The sensors can be respectively turned active or inactive using the "REMOTE RECEIV" in the SERVICE item of OPTION menu. Each sensor senses the signal within the following range when the sensor is active. The front and top sensors: 60 degrees (30 degrees to the left and right of the sensor) within 3 meters about. The back sensor: 40 degrees (20 degrees to the left and right of the sensor) within 3 meters about. 30º 30º NOTE • The remote control signal reflected in the screen or the like may be available. If it is difficult to send the signal to the sensor directly, Approx. 3 m attempt to make the signal reflect. • The remote control uses infrared light to send signals to the projector (Class 1 LED), so be sure to use the remote control in an area free from obstacles that could block the remote control's 30º 30º Approx. 3 m signal to the projector. • The remote control may not work correctly if strong light (such as direct sun light) or light from an extremely close range (such as from an inverter fluorescent lamp) shines on the remote sensor of the projector. Adjust the position of projector avoiding those lights. 20º 20º Approx. 3 m Changing the frequency of remote control signal The accessory remote control has the choice of the mode 1 or the mode 2, in the frequency of its signal. If the remote control does not function properly, attempt to change the signal frequency. Please remember that the "REMOTE FREQ." in SERVICE item of OPTION menu of the projector to be controlled should be set to the same mode as the remote control. To set the mode of the remote control, slide the knob of the frequency switch inside the battery cover into the position indicated by the mode number to choose. Back of the remote control Inside of the battery cover 2 1 Frequency switch ViewSonic PJ1158 14