ViewSonic PJ1158 PJ1158-1 User Guide, English - Page 58
Description, DHCP Dynamic, tion Protocol, IP ADDRESS, SUBNET MASK, DEFAULT GATE, ViewSonic
UPC - 766907232813
View all ViewSonic PJ1158 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
NETWORK Menu NETWORK Menu Consult with your network administrator before connecting to an /'07=4)$? 5'.'%6 existing access point on your network. Incorrect network settings on this projector may cause trouble on the network. 2+%674' +/#)' +0276 &*%2 674010 +2#&&4'55 57$0'6/#5- Select "NETWORK" from the main menu to access the following 5'672 #7&+1 functions. 5%4''0 Select an item using the ▲/▼ cursor buttons on the projector or 126+10 0'6914- &'(#7.6)#6'9#; 6+/'&+(('4'0%' '#0&6+/' G5*16 +0(14/#6+10 remote control, and press the ► cursor button on the projector or '#5;/'07 5'48+%' remote control, or ENTER button on the remote control to execute the item. Then perform it according to the following table. NOTE • The factory default setting for DHCP is "TURN ON". There is no need to set up [DHCP], [IP ADDRESS], [SUBNET MASK] or [DEFAULT GATEWAY] if your network has DHCP enabled. • If you are not utilizing SNTP, then you must set the DATE AND TIME during the initial installation. Please refer to the item DATE AND TIME on the following list. Item DHCP (Dynamic Host Configura- tion Protocol) IP ADDRESS SUBNET MASK DEFAULT GATEWAY Description DHCP TURN ON/TURN OFF: Use the ▲/▼ buttons to turn DHCP on/off TURN ON TURN OFF &*%2 674010 67401(( Select TURN OFF when the network does not have DHCP enabled. Entering the IP ADDRESS : Use the buttons to enter the IP ADDRESS. This function can only be used when DHCP is set to "TURN OFF". 192. 168. 1. 254 IP ADDRESS • The IP ADDRESS is the number that identifies this projector on the network. You cannot have two devices with the same IP ADDRESS on the same network. Entering the SUBNET MASK : Use the buttons to enter the same SUBNET MASK used by your PC. This function can only be used when DHCP is set to "TURN OFF". 255. 255. 255. 0 SUBNET MASK Entering the DEFAULT GATEWAY : Use the buttons to enter the DEFAULT GATEWAY (a node on a computor network that serves as an access point to another network) address.This function can only be used when DHCP is set to "TURN OFF". 0. 0. 0. 0 DEFAULT GATEWAY (continued on next page) ViewSonic PJ1158 53