ViewSonic PJ650 Service Manual - Page 23
Notice of AUTO adjustment - resolution
View all ViewSonic PJ650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
PJ650 6-10 Notice of AUTO adjustment Use of AUTO adjustment with the image through RGB input optimizes VPOSI, HPOSI, HSIZE and HPHASE automatically. In case that projected image has dark tone around its peripheral, AUTO operation sometimes makes artifacts in the image, shifts capture area and so on. Those failures are caused by period of image data is not exactly distinguished to period of blanking on signal processing. To avoid such phenomena, AUTO function should be used with the full size picture that has bright tone on its peripheral. Image when AUTO operates correctly Image when AUTO fails. Noting image of top or bottom lines. Shift of the image to East or West. Artifacts on image. Etc. Note 1) The phenomenon at the failure of AUTO adjustment depends on resolution of input source, scene of picture etc. 2) There is no failure above in AUTO with video source through VIDEO, S-VIDEO or COMPONENT input. The reason is why recognition of input signal's standard does not need to search the capture range from input signal itself. ViewSonic Corporation 22 PJ650