ViewSonic PJ650 Service Manual - Page 8
White balance adjustment, visual inspection - remote control
View all ViewSonic PJ650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
PJ650 4-5 White balance adjustment (visual inspection) Preparations 1. Perform these adjustments after the PSIG or NRSH adjustment described in Section 4-4. 2. Reset gamma correction before adjustment. Place the cursor on [GAMMA] in the Adjustment menu, press the [RESET] key and select [DEFAULT]. Adjustment procedure 1. First, adjust the G color. 2. Select GAMMA, SUB-CONTRAST, and G: in the Adjust menu. If the background is white solid, press the [ENTER] key on the Remote control transmitter to change to [G] monochrome in the 28-tone grayscale. 3. Adjust GAMMA, SUB-CONTRAST, and G: in the Adjust menu so that brightness of 28 steps is best. 4. Don't adjust GAMMA, SUB-BRIGHT, and G: in the Adjust menu. Because we want to keep the best contrast ratio. 5. Then adjust colors R and B. 6. Select GAMMA, SUB-CONTRAST, and G: in the Adjust menu. If the background is white solid, press the [ENTER] key on the Remote control trasmitter to change to [W] monochrome in the 28-tone grayscale. 7. Adjust GAMMA, SUB-BRIGHT, R: and B: in the Adjust menu so that low-brigtness white balance is best. 8. Adjust GAMMA, SUB-CONTRAST, R: and B: in the Adjust menu so that middle-brightness white balance is best. 9. Repeat steps 7 to 8 above, and adjust so that brightness white balance of 28 steps is best. ViewSonic Corporation 7 PJ650