ViewSonic PJ650 Service Manual - Page 24

On-screen Messages - specs

Get ViewSonic PJ650 PDF manuals and user guides View all ViewSonic PJ650 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

PJ650 6-11 On-screen Messages When the unit's power is ON, messages such as those shown below may be displayed. When any such message is displayed on the screen, please respond as described below. Message Description TO MAXIMIZE PERFORMANCE, LAMP REPLACEMENT IS RECOMMENDED. The unit does not display a warning message on the screen when the lamp expires or fails. When the lamp does not light, this indicates that lamp is no longer functional and should be replaced. Replace the lamp and do not forget to reset the timer. CLEAN THE AIR FILTER A note of precaution when cleaning the air filter. AFTER CLEANING AIR FILTER, After cleaning the filter, operate FILTER TIME of the OPTION Menu, then perform RESET THE FILTER TIMER. reset of the filter timer. NO INPUT IS DETECTED ON *** There is no input signal. Check the signal input connection and the status of the signal source. SYNC IS OUT OF RANGE ON *** The horizontal or vertical frequenceies of the inputted signal is outside of the operating range limits of this unit. Please confirm the specs for this unit or the signal source specs. CHECK THE AIR FLOW The internal temperature is rising. Please turn the power OFF, then allow the unit to cool down for approximately 20 minutes. After having confirmed the following items, then please reset the power to ON. • Is there blockage of the air filter? • Is the air filter dirty? • Does the ambient temperature exceeds 35°C? Note Although this message will be automatically disappeared after around 30 seconds, it will be reappeared every time the power is turned ON. ViewSonic Corporation 23 PJ650

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
23
PJ650
6-11 On-screen Messages
When the unit's power is ON, messages such as those shown below may be displayed. When any such
message is displayed on the screen, please respond as described below.
Message
Description
TO MAXIMIZE PERFORMANCE,
LAMP
REPLACEMENT
IS RECOMMENDED.
The unit does not display a warning message on the screen when the lamp expires
or fails. When the lamp does not light, this indicates that lamp is no longer functional
and should be replaced.
Replace the lamp and do not forget to reset the timer.
CLEAN THE AIR FILTER
AFTER CLEANING AIR FILTER,
RESET THE FILTER TIMER.
A note of precaution when cleaning the air filter.
After cleaning the filter, operate FILTER TIME of the OPTION Menu, then perform
reset of the filter timer.
NO INPUT IS DETECTED
ON ***
There is no input signal.
Check the signal input connection and the status of the signal source.
SYNC IS OUT OF RANGE
ON ***
The horizontal or vertical frequenceies of the inputted signal is outside of the
operating range limits of this unit. Please confirm the specs for this unit or the signal
source specs.
CHECK THE AIR FLOW
The internal temperature is rising. Please turn the power OFF, then allow the unit to
cool down for approximately 20 minutes. After having confirmed the following items,
then please reset the power to ON.
• Is there blockage of the air filter?
• Is the air filter dirty?
• Does the ambient temperature exceeds 35°C?
Note
Although this message will be automatically disappeared after around 30 seconds, it will be
reappeared every time the power is turned ON.
ViewSonic Corporation
PJ650