ViewSonic PJ750-2 User Guide - Page 12

Menu Button Press the MENU button on the remote control or the projector control pad to display the OnView® menus. 1 2 3 4 Use the left or right arrow buttons to select a menu (Setup, Input, Image, Options). Use the up and down arrow buttons to highlight an item on the displayed menu. Use the right arrow button to select the highlighted menu item. Use the arrow buttons as indicated on screen to adjust the menu item. Menu Select Button Press the MENU SELECT button on the remote control to display a single menu item at a time. E N G L I S H Position Button Use the POSITION button on the remote control and the arrow buttons to adjust the position of the screen image. NOTE: Position works only on a magnified image and when the input is from a computer (RGB). Magnify Buttons Use the MAGNIFY buttons on the remote control to resize a portion of the projected image. - Press the + button to enlarge the projected image. - Press the - button to decrease the projected image. - Press the OFF button to turn off magnification. Reset Button Press the RESET button on the projector or on the remote control to restore the factory default settings. Select an item and press the Reset button. Volume Buttons Use the VOLUME buttons on the remote control to adjust the loudness of the audio output. Mute Button Press the MUTE button to temporarily turn off the audio output. Blank Button Press the BLANK button on the remote control to display a blank screen showing only the background color. Freeze Button Press the FREEZE button on the remote control to freeze (or hold) an image on screen. Timer Button Press the TIMER button on the remote control to activate the on-screen timer. Press the button again to turn off the display. AUTO Auto Button Use the AUTO button on the remote control to automatically adjust the vertical position and horizontal position, phase, and size. ViewSonic PJ750 9