ViewSonic PJ750-2 User Guide - Page 16

No Signal Menu NO SIGNAL Menu To adjust projector settings before connecting input devices, use the No Signal menu to set the options below: E N G L I S H Volume increases or decreases the speaker loudness. Keystone corrects image distortion that can occur when the angle of the projection is increased. Keystone resizes the top or bottom of the projected image. See " Adjusting the Projector Angle" on page 7. Blank selects the background color of a blank screen. Mirror adjusts the orientation of the screen image based upon the placement of the projector Select Normal for a table-top projection. Select H: Invert for rear projection. Select V: Invert for a front projection ceiling mount. Select H&V: Invert for a rear projection ceiling mount. Start up selects a start-up menu. You can select or deselect the ViewSonic Welcome menu to display automatically at start-up. Menu Color selects a background color for on-screen menus (Orange, Yellow, Green, Blue, Purple, Gray, Black). Timer provides a countdown clock that you can set, typically to time a presentation. Set the countdown timer between 1 and 99 minutes. The time displays on the lower right portion of the screen when you press the Timer button on the remote control. Language allows you to select a menu-display language from a list. Auto Off causes the projector to automatically enter a standby, cool-down mode after a specified amount of time has elapsed without a signal. Sync on G allows you to toggle On or Off the Sync on G option. CAUTION: When you are unsure whether you are using a Sync on G input device, leave this option set to Off. ViewSonic PJ750 13