ViewSonic PJD5232 PJD5232, PJD5234, PJD7223 User Guide (English) - Page 21

Connecting Video source devices You can connect your projector to various Video source devices that provide any one of the following output sockets: • HDMI • Component Video • S-Video • Video (composite) You need only connect the projector to a Video source device using just one of the above!connecting methods, however each provides a different level of video quality. The method!you choose will most likely depend upon the availability of matching terminals on both the!projector and the Video source device as described below: Terminal name HDMI S-Video Video Terminal appearance HDMI S-VIDEO VIDEO Reference "Connecting an HDMI source device" on page 14 "Connecting an SVideo source device" on page 15 "Connecting a composite Video source device" on page 16 Picture quality Best Good Normal Connecting an HDMI source device Examine your Video source device to determine if it has a set of unused HDMI output jacks available: • If so, you can continue with this procedure. • If not, you will need to reassess which method you can use to connect to the device. To connect the projector to an HDMI source device: 1. Take an HDMI cable and connect one end to the HDMI output jack of the HDMI source device. 2. Connect the other end of the HDMI cable to the HDMI jack on the projector. 14