ViewSonic PJD5350LS PJD5350LS User Guide English - Page 44
SYSTEM SETTING: ADVANCED, High Altitude Mode, Audio Settings, Lamp Settings, Filter Settings Optional
View all ViewSonic PJD5350LS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
SYSTEM SETTING: ADVANCED High Altitude Mode Use this function to allow the fans operates at full speed continuously to achieve proper high altitude cooling of the projector. DCR DCR (Dynamic Contrast Ratio): Enable DCR will further enhance contrast ratio by darkening the black scenes. Disable DCR will resume to normal contrast performance. DCR will impact lamp life and system noise performance. Audio Settings Mute Cuts off the sound temporarily. Audio Volume Adjusts the projector's volume level. Power On/Off Ring Tone Setting the sound mute or changing the sound level will not affect the Power On/Off Ring Tone. The only way to change Power On/Off Ring Tone is setting On or Off here. Lamp Settings Lamp Mode Sets the Lamp Mode. • Normal: 100% lamp power • Economic: 80% lamp power • Dynamic: 30~100% lamp power based on signal • Sleep Mode: 30% lamp power Reset Lamp Hours Reset the lamp Hour to 0 hours. Lamp Hours Display the lamp's elapsed operating time (in hours). Filter Settings (Optional) Filter Mode Use this function to activate filter mode after the projector is installed an optional filter cover. Reset Filter Hours Reset the filter Hour to 0 hours. Filter Hours Display the filter's elapsed operating time (in hours). 36