ViewSonic PJD5350LS PJD5350LS User Guide English - Page 49

Installing the cable management cover (optional accessory), Resetting the filter timer

Get ViewSonic PJD5350LS PDF manuals and user guides View all ViewSonic PJD5350LS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

Resetting the filter timer 5. Open the OSD menu and go to the SYSTEM SETTING: ADVANCED > Filter Settings menu. 6. Press Enter and the Filter Settings page is displayed. 7. Highlight Reset Filter Hours and press Enter. A warning message is displayed asking if you want to reset the filter timer. 8. Highlight Reset and press Enter. The lamp timer will be reset to '0'. Caution • Remember to use Filter Mode to Off in the SYSTEM SETTING: ADVANCED > Filter Settings menu when using the projector with the dust filter removed. Setting Filter Mode to Off does not reset the filter timer. The timer will continue counting the next time you fit the filter back on and set Filter Mode to On. Installing the cable management cover (optional accessory) 1. Make sure that all the cables are properly connected to the projector. 2. Attach the cable management cover to the back of the projector. 3. Tighten the screws that secure the cable management cover. 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
41
Resetting the filter timer
5.
Open the OSD menu and go to the
SYSTEM
SETTING: ADVANCED
>
Filter
Settings
menu.
6. Press
Enter
and the
Filter Settings
page is displayed.
7. Highlight
Reset Filter
Hours and press
Enter
. A warning message is displayed
asking if you want to reset the filter timer.
8. Highlight
Reset
and press
Enter
. The lamp timer will be reset to '0'.
Caution
•
Remember to use Filter Mode to Off in the SYSTEM SETTING: ADVANCED > Filter
Settings menu when using the projector with the dust filter removed. Setting Filter Mode
to Off does not reset the filter timer. The timer will continue counting the next time you
fit the filter back on and set Filter Mode to On.
Installing the cable management cover (optional
accessory)
1.
Make sure that all the cables are properly connected to the projector.
2.
Attach the cable management cover to the back of the projector.
3.
Tighten the screws that secure the cable management cover.