ViewSonic PJL1035 Service Manual - Page 11
L1035-2, Before, adjusting., minutes
UPC - 766907222111
View all ViewSonic PJL1035 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
PJL1035-2 4. Adjustment 4 -1 Before adjusting. 4-1-1 ADJUSTMENT menu. The ADJUSTMENT menu is needed at all adjust- ments. How to set up ADJUSTMENT menu follow these; a.Push the MENU button. b.Keep the RESET button pushing for a several seconds while the PICTURE menu is displayed. Note: All parameters used in these adjustment are printed in boldface as shown in Fig.4-2-a and Fig.4-2-b. VIDEO GAMMA DAC_P S/H AIR-ROW SUB-BRIGHT SUB-CONTRAST WI-TE-POSI BLACK2-POSI V. COM C.UNIFORMITY ADJUSTMENT menu PICTURE menu Fig.4-1 ADJUSTMENT menu VIDEO GAMMA DAC_P S/H TiMING GHOST SUE) POS1 Fig 4-2-a Parameters in the DAC_P of the ADJUSTMENT menu. 4-1-2 Selection of adjustment. When any parts in the table 4-1 is changed, choose the profer adjusting items with the chart. Keep the adjusting order, from upper to lower in it. For example, adjust "White balance" firstly and 'Ghost" next at replacement of the PWB ass'y color. Fig 4-2-b Parameters in the S/H of the ADJUSTMENT menu. Table 4-1 : Relation between the replaced part and adjustment. Adjustment Replaced part P.O.filter (Chap.4-2) White balance (Chap.4-3) Ghost (Chap.4-4) Dichroic optics unit Yes No No LCD/LENS prism ass'y Yes Yes Yes PWB ass'y drive No Yes Yes PWB ass'y color No Yes No "Yes" means need for adjustment, "No" means no need for adjustment. 4-1-3 Setting of condition before adjustment. 1. Apply heat-running for 10 minutes or more before adjustment. 2. Project 40 inches size image with zoom set to the widest. 3. Press the RESET button on the remote controller to set picture adjustment to NORMAL. 4. Use a darkroom whose luminance is less than 2[Ix]. ViewSonic Corporation : Confidential - Do Not Copy