ViewSonic PJL1035 Service Manual - Page 13
ViewSonic PJL1035 - LCD Projector SXGA Manual
UPC - 766907222111
View all ViewSonic PJL1035 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
PJL1035-2 4 - 3 White balance adjustment Preparations for adjustment 4-3-1 Flicker adjustment. Refer to the attached drawing (Fig.4-4). 1. Use the XGA VESA(60) timing signal to input a 0.35Vp-p R primary color signal for every other line. 2. Use DAC_P - V.COM - R in the adjustment menu to adjust until flicker is minimum on a whole image. 3. Use the XGA VESA(60) timing signal to input a 0.35Vp-p G primary color signal for every other line. 4. Use DAC_P - V.COM - G in the adjustment menu to adjust until flicker is minimum on a whole image. 5. Use the XGA VESA(60) timing signal to input a 0.35Vp-p B primary color signal for every other line. 6. Use DAC_P - V.COM - B in the adjustment menu to adjust until flicker is minimum on a whole image. R or G or B Adjust it so that flicker is the lest. Black Fig.4-4 Test pattern for the flicker adjustment 4-3-2 Adjustment of color uniformity 1. Input gray pattern at 0.35Vp-p with a timing signal of XGA VESA(60). 2. Set C.UNIFORMITY - SWITCH in the adjustment menu to OFF. 3. Check the color unevenness of the original image. 4. Continue this adjustment unless color uniformity is good. 5. Set C.UNIFORMITY - SWITCH in the adjustment menu to ON. 6. Adjust following parameters to make better color balance with same input signal. a. Adjust "C. UNIFORMITY - H - R -RP" so that color balance of left and right side is best by visual check. This is control correction wave for Horizontal Saw. b.Adjust "C. UNIFORMITY - H - R -PB" so that color balance of center and side is best by visual check. This is control correction wave for Horizontal Parabola. c. Adjust "C. UNIFORMITY - H - B -RP" so that color balance of left and right side is best by visual check. This is control correction wave for Horizontal Saw. d. Adjust "C. UNIFORMITY - H - B -PB" so that color balance of center and side is best by visual check. This is control correction wave for Horizontal Parabola. e. Adjust "C. UNIFORMITY.- V - B -RP" so that color balance of top and bottom is best by visual check. This is control correction wave for Vertical Saw. "C. UNIFORMITY - H - R -RP" : horizontal correction for Fl horizontal Saw "C. UNIFORMITY - H - R -PB" : horizontal correction for R horizontal Parabola "C. UNIFORMITY - H - B -RP" : horizontal correction for B horizontal Saw "C. UNIFORMITY - H - B -PR" : horizontal correction for B horizontal Parabola "C. UNIFORMITY - V - B -RP" : vertical correction for B vertical Saw. ViewSonic Corporation - 10 - Confidential - Do Not Copy