ViewSonic PX747-4K PX727-4K User Guide English - Page 29
Adjusting Sharpness, Selecting a gamma setting, Selecting a Color Temperature - 3d
View all ViewSonic PX747-4K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Adjusting Sharpness Go to the PICTURE > Sharpness menu and press / . The higher the value, the sharper the picture becomes. The lower the value, the softer the picture becomes. Selecting a gamma setting Go to the PICTURE > Advanced > Select Gamma menu and select a preferred setting by pressing / . Gamma refers to the relationship between input source and picture brightness. Selecting a Color Temperature Go to the PICTURE > Advanced > Color Temperature menu and press / . There are several preset color temperature settings available. The available settings may vary according to the signal type selected. • Cool: With the highest color temperature, Cool makes the image appear the most bluish white than other settings. • Normal: Maintains normal colorings for white. • Warm: Makes images appear reddish white. Setting a preferred color temperature 1. Go to the PICTURE > Color Temperature menu and press Enter. 2. Press / to select Cool, Normal or Warm and press Enter. 3. Press / to highlight the item you want to change and adjust the values by pressing / . • Red Gain/Green Gain/Blue Gain: Adjusts the contrast levels of Red, Green, and Blue. • Red Offset/Green Offset/Blue Offset: Adjusts the brightness levels of Red, Green, and Blue. Color Management Only in permanent installations with controlled lighting levels such as boardrooms, lecture theaters, or home theaters, should color management be considered. Color management provides fine color control adjustment to allow for more accurate color reproduction, should you require it. If you have purchased a test disc which contains various color test patterns and can be used to test the color presentation on monitors, TVs, projectors, etc., you can project any image from the disc on the screen and enter the 3D Color Management menu to make adjustments. To adjust the settings: 1. Go to the PICTURE > Advanced > 3D Color Management menu. 2. Press Enter and the 3D Color Management page is displayed. 3. Highlight Primary Color and press / to select a color from among Red, Yellow, Green, Cyan, Blue, or Magenta. 4. Press to highlight Hue and press / to select its range. Increase in the range will include colors consisted of more proportions of its two adjacent colors. 24