ViewSonic VP720B Service Manual - Page 7
Specification - audio
![]() |
UPC - 766907169218
View all ViewSonic VP720B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
2. Specification 1. General Requirements General Specifications Test Resolution & Frequency Test Image Size Contrast and Brightness Controls "1280 x 1024" @ 60Hz Full Size Factory Default: Contrast = 100%, Brightness = 100% 2. Signal Interface Video Interface Analog Input Connector Default Input Connector Video Cable Connector DB-15 Pin out Video Signals Video Impedance Exclusions DB-15 (Analog) DVI = DVI-D (Digital) Defaults to the first detected input Compliant DDC 1/2B. Video RGB (Analog) Separate Sync / Composite Sync / SOG TMDS (Digital) 75 Ohms (Analog), 100 Ohms (Digital) Not compatible with interlaced video. 3. Power Power Supply Input Voltage Range Power Dissipation 90 to 264 VAC 40 Watts (Typ.) 4. AUDIO INTERFACE (SPEAKER SPECIFICATION) Speaker specification Line input connection 3.5 mm stereo jack Line input signal 1.0 Vrms Line input impedance 22 kOhm Maximum power output (Electric) 1 W@ < 15 % distortion Signal to Noise Ratio 40 dB Frequency response 100 Hz - 20 Khz Distortion < 5 % THD (@1kHz) Vibration There should be no audible vibration with volume at 100% and treble / bass at default. Screen image There should be no affect on the screen image stability under any conditions. Connector PC99 requirement Audio in Lime Green pantone # 577C Cable type / length 3.5mm stereo cable / 1.8m length Audio DPMS Speakers should be off when the rest of the monitor is in power saving. No any sympathetic or abnormal noise allowed under Volume OSD ≤ 70% 5. Electrical Requirements Horizontal Frequency Vertical Refresh Rate Maximum Pixel Clock Sync Polarity 24 - 82 kHz 50 - 85 Hz. 135 MHz Independent of sync polarity. ViewSonic Corporation Confidential - Do Not Copy 4 VP720-1_VP720b-1
![](/manual_guide/products/viewsonic-vp720b-service-manual-38787a4/7.png)