Viking 18" Fully Integrated All Freezer with Custom Panel Installation Instruc
Viking 18" Fully Integrated All Freezer with Custom Panel Manual
View all Viking 18" Fully Integrated All Freezer with Custom Panel manuals
Add to My Manuals
Save this manual to your list of manuals |
Viking 18" Fully Integrated All Freezer with Custom Panel manual content summary:
- Viking 18" Fully Integrated All Freezer with Custom Panel | Installation Instruc - Page 1
Installation Guide 7 SERIES Integrated All Refrigerator VRI7240 / CVRI7240 FRI7240 / CFRI7240 MVRI7240 / CMVRI7240 Integrated All Freezer VFI7180 / CVFI7180/ VFI7240 / CVFI7240 FFI7180 / CFFI7180 / FFI7240 / CFFI7240 MVFI7180 / CMVFI7180 / MVFI7240 / CMVFI7240 - Viking 18" Fully Integrated All Freezer with Custom Panel | Installation Instruc - Page 2
18 Flush Mount Side Trim 19 Door Panel Adjustments 19 Door Stop Adjustment 20 System Specifications and Data 21 Performance Checklist 22 Control Panels 22 Service & Registration 23 2 - Viking 18" Fully Integrated All Freezer with Custom Panel | Installation Instruc - Page 3
provided many important safety messages in this manual and on your appliance. ALWAYS read you what can happen if the instructions are not followed. It is prevent the unit from being serviced. • make sure that you valve) • assure that floor will support unit, door panels and contents (approximately - Viking 18" Fully Integrated All Freezer with Custom Panel | Installation Instruc - Page 4
. • Viking Range, LLC will NOT warranty any problems resulting from GFI outlets which are not installed properly to turn the power off when cleaning or servicing the refrigerator. To turn the power off, is completely installed and secured per installation instructions. Use two or more people to - Viking 18" Fully Integrated All Freezer with Custom Panel | Installation Instruc - Page 5
Cutout Dimensions (632.55"cm) Can be located on either side * (o2p1e3n.4i8ncg4m"h)emigihnt. (o2p18e65n.3i-n3cgm/1h) e6mi"gahxt. Electric Outlet Location (1359-.41/c2m") (140-1.+8/4cm" ) dliemveenlinsigon Water Line Entry Area *WCuidtothut spec*ifRicechMfeaorrtdtoefolSsrpecfication (15.6/ - Viking 18" Fully Integrated All Freezer with Custom Panel | Installation Instruc - Page 6
Specifications (VRI/FRI/MVRI) Integrated All Refrigerator Description Overall width Overall height (from bottom) Overall depth from rear Cutout width Cutout height Cutout depth Electrical requirements Maximum amp usage Inlet water requirements Overall interior capacity Refrigerator VRI MVRI 24" - Viking 18" Fully Integrated All Freezer with Custom Panel | Installation Instruc - Page 7
Specifications (VFI/FFI/MVFI) Description Overall width Overall height (from bottom) Overall depth from rear Cutout width Cutout height Cutout depth Electrical requirements Maximum amp usage Inlet water requirements Overall interior capacity Freezer Approximate shipping weight Integrated All - Viking 18" Fully Integrated All Freezer with Custom Panel | Installation Instruc - Page 8
Dimensions (VRI/FRI/MVRI) 83-15/16" (213.2 cm) (5262.0-1c/m16)" B A 4-1/16" (10.3 cm) Model VRIVFI FRI/FFI MVRI/MVFI 8 Dimension A 27-11/16" (70.3 cm) Dimension B* 24-3/4" (62.9 cm) N/A 24" (61.0 cm) 27-5/16" (69.4 cm) 24-3/4" (62.9 cm) *To outside of door panel - Viking 18" Fully Integrated All Freezer with Custom Panel | Installation Instruc - Page 9
Door Swing / Tipping Radius 18" 24" A 19-1/16" (48.4 cm) 25-3/16" (64.0 cm) B 20-1/16" (51.0 cm) 26-1/16" (66.2 cm) C C 4-1/2" (11.4 cm) 6-3/16" (15.7 cm) A B 127-3/16" (323.1 cm) 1050 900 D 83-15/16" (213.2 cm) 111-3/16" (323.1 cm) 87-3/4" (222.9 cm) 83-15/16" (213.2 cm) 18" 24" D - Viking 18" Fully Integrated All Freezer with Custom Panel | Installation Instruc - Page 10
heavy and tips easily when not completely installed. To avoid a hazard due to instability of the appliance, it must be installed according to the instructions including the anti-tip bracket C Anti-tip Bracket Cabinet Opening There are 12 hole locations on the anti-tip bracket. Of those 12, at - Viking 18" Fully Integrated All Freezer with Custom Panel | Installation Instruc - Page 11
can be moved around corners and through doorways. • Floors can support unit's weight plus food weight (approximately 1200 pounds [540 kg] cord is damaged, it must be replaced by the manufacturer or it service agent or a qualified service technician in order to avoid a hazard. DO NOT use an extension - Viking 18" Fully Integrated All Freezer with Custom Panel | Installation Instruc - Page 12
moving the unit out of enclosure for cleaning or service. Tubing should be soft instead of rigid and ends All four leveling legs must contact the floor to support and stabilize the full weight. • DO NOT move and install unit. Failure to follow this instruction can result in back or other injury. • - Viking 18" Fully Integrated All Freezer with Custom Panel | Installation Instruc - Page 13
Moving Unit 1 A Remove shipping brackets from skid by removing four bolts (two on each side) with a 1/2" (1.3 cm) deep-well socket wench and a pair of pliers. Note: Tilting unit is not required to remove shipping brackets. Slip appliance dolly between unit and skid. Remove unit from skid. Note: - Viking 18" Fully Integrated All Freezer with Custom Panel | Installation Instruc - Page 14
Optional Custom Front Panels - Dimensions Note: Overlay panel must be dry, solid, straight one-piece panels. The use of multiple panel pieces to achieve the dimensions is not recommended. Maximum panel weight: 18" door panel - 28 lbs (12.6 kg) 24" door panel - 41 lbs (18.5 kg) Custom Panel - hole - Viking 18" Fully Integrated All Freezer with Custom Panel | Installation Instruc - Page 15
Optional Custom Front Panels - Install In order to access the mounting holes, unsnap panel trim on both sides of door. Panel trim Mounting Screw locations 15 - Viking 18" Fully Integrated All Freezer with Custom Panel | Installation Instruc - Page 16
and tips easily when not completely installed. To avoid a hazard due to instability of the appliance, it must be installed according to the instructions including the anti-tip bracket Ensure you have approximately 6 ft. (1.8 m) of 1/4" (6 mm) copper tubing available at the right rear side of the - Viking 18" Fully Integrated All Freezer with Custom Panel | Installation Instruc - Page 17
Water Line Installation With the refrigerator in line with the cutout, but outside of the cabinetry, insert the copper tubing through the indicated hole. Push the copper tubing through the machine compartment until it comes out the front side of the refrigerator. Roll the refrigerator into place in - Viking 18" Fully Integrated All Freezer with Custom Panel | Installation Instruc - Page 18
Leveling Unit Once the unit is in position, height adjustment can be made from the front. Remove acess panel just below the water filter. Using a 5/16" hex drive, turn clockwise to raise the unit or counterclockwise to lower. Use the lowest torque setting when using a power drill. Do not turn the - Viking 18" Fully Integrated All Freezer with Custom Panel | Installation Instruc - Page 19
Flush Mount Side Trim After the unit has been placed in the cutout, leveled and all connections completed, the unit will need to be fastened to the cabinetry. Open the door. Using the flat wood screws, fasten the unit to the cabinetry on both sides. NOTE: Only use the screws provided and use caution - Viking 18" Fully Integrated All Freezer with Custom Panel | Installation Instruc - Page 20
Door Stop Adjustment Your refrigerator is factory set at a 90o degree opening. The 90 degree door stop opening is shown in the illustration below with the long end of the door stop facing away from the door. To change to 105o door stop, locate the door stop on top of the door hinge. Remove the two - Viking 18" Fully Integrated All Freezer with Custom Panel | Installation Instruc - Page 21
performance may vary. Must be installed and operated in accordance with manufacturer's recommended procedures and guidelines. Installation instructions, parts and service availability, and standard warranty are included with the product when shipped. This drinking water system must be maintained - Viking 18" Fully Integrated All Freezer with Custom Panel | Installation Instruc - Page 22
Performance Checklist -Verify cabinet size. -Verify electrical supply and water supply (if applicable). -Install anti-tip device(s) and verify unit is secure. -Position unit in cutout, level at desired height and secure unit. -Plug-in unit and verify operation. -Connect water supply (if applicable). - Viking 18" Fully Integrated All Freezer with Custom Panel | Installation Instruc - Page 23
hours before changing temperatures. Service & Registration If service is required, call your authorized service agency. Have the following the problem that you are having. If you are unable to obtain the name of an authorized service agency, or if you continue to have service problems, contact - Viking 18" Fully Integrated All Freezer with Custom Panel | Installation Instruc - Page 24
062223-000 EN Viking Range, LLC 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-(845-4641) or visit our web site at vikingrange.com UL C UL (052518)
Installation
Guide
7 SERIES
Integrated All Refrigerator
Integrated All Freezer
VFI7180 / CVFI7180/
VFI7240 / CVFI7240
FFI7180 /
CFFI7180 / FFI7240 / CFFI7240
MVFI7180 / CMVFI7180 / MVFI7240 / CMVFI7240
VRI7240 / CVRI7240
FRI7240
/ CFRI7240
MVRI7240 / CMVRI7240