Viking 18" Fully Integrated All Freezer with Custom Panel Installation Instruc - Page 17
Tighten the nut until the ferrule fits snug on the copper
![]() |
View all Viking 18" Fully Integrated All Freezer with Custom Panel manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Water Line Installation With the refrigerator in line with the cutout, but outside of the cabinetry, insert the copper tubing through the indicated hole. Push the copper tubing through the machine compartment until it comes out the front side of the refrigerator. Roll the refrigerator into place in the cabinet cutout. Coil the copper tubing in a vertical loop so that the end of the copper tube faces toward the rear of the refrigerator. Install nut and ferrule over end of copper tube. Insert the end of the copper tube into the water valve. Tighten the nut until the ferrule fits snug on the copper tube. Turn on water supply and check for leaks. Repair leaks if found. Level the refrigerator, replace the access panel and kickplate. Copper tubing 17 Water valve
![](/manual_guide/products/viking-24-fully-integrated-refrigerator-57-series-panel-installation-instructions-d6679b5/17.png)