Viking BVGRC8366BWSS Use and Care Manual - Page 14

Cleaning and Maintenance, Replacing Oven Lights

Page 14 highlights

PRODUCT CARE Cleaning and Maintenance Glass Surfaces Clean with detergent and warm water. Glass cleaner can be used to remove fingerprints. If using glass cleaner ammonia, make sure that it does not run down on exterior door surface. Broiler Pan and Grid Can be placed in the dishwasher or cleaned by hand with detergent and hot water. For stubborn spots, use a soapfilled Scotch Brite™ pad. Oven Racks Clean with detergent and hot water. Stubborn spots can be scoured with a soap-filled Scotch Brite™ pad. WARNING BURN OR ELECTRICAL SHOCK HAZARD Make sure all controls are OFF and oven is COOL before cleaning. Failure to do so can result in burns or electrical shock. 26 Replacing Oven Lights WARNING ELECTRICAL SHOCK HAZARD DO NOT touch a hot oven light bulb with a damp cloth as the bulb could break. Should the bulb break, disconnect electric power to the appliance at the main fuse or circuit breaker before removing bulb to avoid electrical shock. DO NOT touch bulb with bare hands. Clean off any signs of oil from the bulb and handle with a soft cloth. 1. Remove screw. 1 2. Unsnap glass light cover. 3. Firmly grasp light bulb and pull out. 4. Replace with halogen bulb using volt and wattage requirements listed on glass cover. 5. Replace the light cover by snapping glass cover onto metal box. Reconnect power at the main fuse or circuit breaker. 6. Secure with screw. 2 3 4 5 6 27 PRODUCT CARE

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18

26
27
PRODUCT CARE
PRODUCT CARE
Glass Surfaces
Clean with detergent and warm water. Glass cleaner can
be used to remove fingerprints. If using glass cleaner
ammonia, make sure that it does not run down on
exterior door surface.
Broiler Pan and Grid
Can be placed in the dishwasher or cleaned by hand with
detergent and hot water. For stubborn spots, use a soap-
filled Scotch Brite™ pad.
Oven Racks
Clean with detergent and hot water. Stubborn spots can
be scoured with a soap-filled Scotch Brite™ pad.
Cleaning and Maintenance
1
6
2
5
3
4
Replacing Oven Lights
WARNING
ELECTRICAL SHOCK HAZARD
DO NOT
touch a hot oven light bulb with
a damp cloth as the bulb could break.
Should the bulb break, disconnect
electric power to the appliance at the main fuse or
circuit breaker before removing bulb to avoid
electrical shock.
DO NOT
touch bulb with bare hands. Clean off
any signs
of oil from the bulb and handle with a soft cloth.
1. Remove screw.
2. Unsnap glass light cover.
3. Firmly grasp light bulb and pull out.
4. Replace with halogen bulb using volt and wattage
requirements listed on glass cover.
5. Replace the light cover by snapping glass cover onto
metal box. Reconnect power at the main fuse or circuit
breaker.
6. Secure with screw.
WARNING
BURN OR ELECTRICAL
SHOCK HAZARD
Make sure all controls are
OFF and oven is COOL
before cleaning. Failure to do so can result in burns
or electrical shock.