Viking FDSB5483 Installation Instructions - Page 27
Kickplate Installation
View all Viking FDSB5483 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
HInestaadllaintieon 15 16 Lift unit off rollers to desired height and level unit using a 5/16" head wrench. NOTE: DO NOT use an electric device. Overtightening can cause damage. 17 Screw Wall 2 x 4 Refrigerator Insert mounting screws into 2x4 attached to wall stud Make sure evaporator pan is in correct location. Kickplate Installation 18 19 1 1 2 3 2 Align holes on both ends of louvered panels and insert screws. Using a Phillips screwdriver, attach the kickplate to the unit and adjust to desired height. 27
27
27
17
Make sure evaporator pan is in correct location.
15
Wall
2 x 4
Refrigerator
Screw
16
Lift unit off rollers to desired height and level unit using
a 5/16” head wrench. NOTE: DO NOT use an electric
device. Overtightening can cause damage.
Insert mounting screws into 2x4 attached to wall stud
1
2
18
2
1
3
19
Align holes on both ends of louvered panels
and insert screws.
Using a Phillips screwdriver, attach the
kickplate to the unit and adjust to desired height.
Kickplate Installation
Installation