Viking VCSO210SS Installation Instructions - Page 1

Viking Installation Guide IMPORTANT-Please Read and Follow! • Before beginning, please read these instructions completely and carefully. • Be sure to DISCONNECT THE PLUG of the microwave oven from the electrical outlet before installing the built-in trim kit. Remove the turntable from the oven cavity. • Because the kit includes metal parts, caution should be used in handling and installation to avoid the possibility of injury. • Do not remove permanently affixed labels, warnings, or plates from the product. This may void the warranty. • Please observe all local and national codes and ordinances. • The installer should leave these instructions with the consumer who should retain for local inspector's use and for future reference. • This built-in trim kit is designed for use only with Viking COMBI STEAM/CONVECT™ OVEN. • Your oven can be built into a cabinet or wall or above any electric wall oven, gas wall oven or warming drawer. • NOTE: The bottom of the cut-out opening for built-in use must be 36 inches (915 mm) or higher from the floor. • The electrical requirements for this oven are 120 volts, 15 amps. The oven has a 5-15 plug and requires a 5-15 receptacle. • PLEASE READ THESE INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION! Cabinet or wall opening Built-in kit frame assembly Combi Steam/Convect™ Oven HEIGHT 19" - 19 1/8" (482 mm - 486 mm) 22 1/8" (562.1 mm) 17 1/4" (438 mm) WIDTH 28" (712 mm) 29 1/2" (749.3 mm) 21 3/4" (553 mm) DEPTH 23 1/4" minimum (509.5 mm minimum) 18 3/8" (468 mm) Combi Steam/Convect™ Oven and Built-In Trim Kit 111 Front Street Greenwood, Mississippi 38930 USA