Viking VDOF730SS Installation Instructions - Page 21
Site Preparation
View all Viking VDOF730SS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Installation Site Preparation Note: It is recommended that a thorough site inspection be conducted PRIOR to unpacking and moving this appliance. • WARNING: DO NOT use the handle or oven door to lift the oven. Remove door before installation to ensure that it is not used to lift the unit. Make sure pins are inserted into hinges before removing door to prevent personal injury to hands and/or fingers. Do not lift or carry the door by the handle. • Confirm available access to adequate power - see electrical requirements. -Single oven units require a 30 amp circuit -Double oven units require a 50 amp circuit Note: A minimum of 2" spacing above and below the oven to any adjacent items is required for ventilation purposes. • It is recommended that 3/4" or larger material be utilized to create a support platform for this appliance. • BE SURE that support for this appliance is perpendicular to the front facing of the wall or cabinet before you perform the installation. • Use of a hydraulic lift is recommended for the installation of double oven units. • All openings in the wall behind the appliance or in the floor under the appliance should be sealed. • Keep appliance area clear and free from combustible materials, gasoline and other flammable vapors. • WARNING: DO NOT USE AN EXTENSION CORD WITH THIS APPLIANCE. SUCH USE MAY RESULT IN FIRE, ELECTRICAL SHOCK OR OTHER PERSONAL INJURY. Installation Procedure (Select / Premiere Models) 1 2 Remove wooden brace on front of pallet. 21 Open door completely. Place pin in pin hole.