Viking VDOF730SS Installation Instructions - Page 4

Important - warranty

Get Viking VDOF730SS PDF manuals and user guides View all Viking VDOF730SS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

IMPORTANT- Read and Follow! A GFI shall be used if required by NFPA-70 (National Electric Code), federal/state/local laws, or local ordinances. • The required use of a GFI is normally related to the location of a receptacle with respect to any significant sources of water or moisture. • Viking Range, LLC will NOT warranty any problems resulting from GFI outlets which are not installed properly or do not meet the requirements below. If the use of a GFI is required, it should be: • Of the receptacle type (breaker type or portable type NOT recommended) • Used with permanent wiring only (temporary or portable wiring NOT recommended) • On a dedicated circuit (no other receptacles, switches or loads in the circuit) • Connected to a standard breaker of appropriate size (GFI breaker of the same size NOT recommended) • Rated for Class A (5 mA +/- 1 mA trip current) as per UL 943 standard • In good condition and free from any loose-fitting gaskets (if applicable in outdoor situations) • Protected from moisture (water, steam, high humidity) as much as reasonably possible 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
A GFI
shall be used if required by NFPA-70 (National Electric Code), federal/state/local
laws, or local ordinances.
•
The required use of a GFI is normally related to the location of a receptacle with respect to
any significant sources of water or moisture.
•
Viking Range, LLC will NOT warranty any problems resulting from GFI outlets which are not
installed properly or do not meet the requirements below.
If the use of a GFI is required
, it should be:
•
Of the receptacle type (breaker type or portable type NOT recommended)
•
Used with permanent wiring only (temporary or portable wiring NOT recommended)
•
On a dedicated circuit (no other receptacles, switches or loads in the circuit)
•
Connected to a standard breaker of appropriate size (GFI breaker of the same size NOT
recommended)
•
Rated for Class A (5 mA +/- 1 mA trip current) as per UL 943 standard
•
In good condition and free from any loose-fitting gaskets (if applicable in outdoor situations)
•
Protected from moisture (water, steam, high humidity) as much as reasonably possible
4
IMPORTANT–
Read and Follow!