Viper 3100 Owner Manual - Page 10
Nuisance Prevention Circuitry NPC
View all Viper 3100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Zone # (led flashes) 1 2 3 5 Table of Zones Zone Name Trunk/Sensor 2 Shock Sensor Door Ignition Note: The Warn-away trigger does not report on the LED. Nuisance Prevention Circuitry (NPC) NPC monitors all alarm zones and, if any are triggered excessively, bypasses them until corrected. If a point of entry (trunk, hood, door) is left open following a forced entry, it is bypassed. It becomes active again only after being closed. Bypassed sensors automatically reset after one hour, and after the vehicle is driven. Disarming then re-arming the alarm does not reset bypassed sensors. 8 © 2011 Directed Electronics. All rights reserved.
8
© 2011 Directed Electronics. All rights reserved.
Table of Zones
Zone # (led flashes)
Zone Name
1
Trunk/Sensor 2
2
Shock Sensor
3
Door
5
Ignition
Note:
The Warn-away trigger does not report on the LED.
Nuisance Prevention Circuitry (NPC)
NPC monitors all alarm zones and, if any are triggered excessively,
bypasses them until corrected. If a point of entry (trunk, hood, door)
is left open following a forced entry, it is bypassed. It becomes active
again only after being closed.
Bypassed sensors automatically reset after one hour, and after the
vehicle is driven. Disarming then re-arming the alarm does not reset
bypassed sensors.