Viper 3100 Owner Manual - Page 6
Using your System - alarm system
View all Viper 3100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Using your System Arm Press and release . The alarm arms, doors lock (if connected), and the siren chirps and parking lights flash once. If Valet mode* is On, the doors lock without siren chirps, the alarm is disabled. Exit Valet mode to arm the alarm normally. If a trigger zone fault is detected the siren chirps once again and the Status LED generates a Trigger Zone Fault report**. Disarm When the system is already armed, Press and release . The alarm disarms, doors unlock (if connected), and the siren chirps and parking lights flash twice. An Alarm Report** alert of 4 or 5 siren chirps will replace the normal disarm chirps if the alarm was triggered. AUX Channel 2 Press and hold AUX . The Trunk opens (if connected) when this button is pressed for 2 seconds. 4 © 2011 Directed Electronics. All rights reserved.