Viper 3100 Owner Manual - Page 11

Remote and System Operations Passive Arming Park and exit the vehicle, after the doors are closed the Passive arming countdown begins. The led flashes quickly and after 30 seconds the system arms itself. Anytime before the system arms you can re-enter the vehicle or open the trunk to load or unload items and, after closing passive arming resumes. To stay secure in case of accidental disarming the system, if a door is not opened within 30 seconds the system re-arms itself. Note: This is a programmable option. Valet Mode Valet mode can be entered and exited by performing the Remote Valet command or manually using the vehicle key and the valet button. Valet Mode defeats the alarm features while the convenience features still operate normally. Use the following steps to manually enter and exit Valet Mode: 1. Turn the ignition On and then Off 2. Immediately press and release the valet button once 3. The status LED turns On when entering and Off when exiting. You can also enter or exit Valet Mode by using the remote: 1. Open any vehicle door. 2. Press and then press AUX. Press again. The LED system status indicator lights solid when you enter Valet Mode and turns off when you exit Valet Mode. © 2011 Directed Electronics. All rights reserved. 9