Viper 4103XV Owner Manual - Page 12

To turn the rear defogger output On: 1. Simultaneously press & release the remote control. + + buttons on the 2. The lights will flash 3 times. 3. The rear defogger output will once again activate when the ve- hicle is remote started Note: If the remote start is on the lights will turn off then flash 3-times before returning to their normal output and the defogger output will activate as programmed. ➢ Valet Take-Over The Valet Take-Over feature allows the vehicle to remain running after the key has been removed from the ignition. This feature is useful for occasions when you wish to exit and lock the vehicle for short periods of time, but would like to leave the motor running and the climate controls on. To perform Valet Take-Over: 1. Before turning off the engine, press and release on the remote control for 1 second. 2. Turn the ignition key to the OFF position. (The engine will stay running.) 3. The vehicle will run for the pre-p­ rog­ ram­med period of time (12, 24, or 60 minutes) or until a shutdown input is trig­gered. 6 © 2009 Directed Electronics. All rights reserved.