Viper 4103XV Owner Manual - Page 17

Programming Options Programming options control your system's normal, operational set-up. Most options do not require additional parts, but some may require additional installation labor. This system's programming options are listed below, with the factory default settings in bold: • 12, 24, or 60 minute run time. your system can be programmed to allow the vehicle to run for 12, 24, or 60 minutes when remote started. Can be programmed from 1 -60 minutes. • 3, 6, 9, or 12 minute timer mode run time. Your system can be programmed to allow the vehicle to run for 3, 6, 9, or 12 minutes when remote started in timer mode. Can be set from 1-16 minutes by your installer. • Comfort closure is a programming option which closes the vehicle's windows after remote locking. • Parking lights flashing or constant. Your system can be programmed to either flash or to turn on the parking lights constantly during the entire remote start operation. • Ignition switch-controlled door-locking on or Off. With this feature on, the doors will lock 3 seconds after the ignition key is turned on, and unlock when the ignition key is turned off. • The horn honk confirmations for locking and unlocking can be programmed on or Off. In order for this feature to be programmed on, the horn must be connected to the system. © 2009 Directed Electronics. All rights reserved. 11