Viper 4103XV Owner Manual - Page 13
Car Finder, Timer Mode - wiring
View all Viper 4103XV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
➢ Car Finder Car finder allows you to locate your vehicle, by having the system flash the parking lights on your vehicle.. To activate: 1. Press and release the and buttons at the same time 2. The lights flash 5 times slowly allowing you to locate your vehicle. ➢ Timer Mode When you activate timer mode the system automatically starts the vehicle every three hours for a maximum of 6 starts. The pre-programmed engine runtime is 12 minutes. • Press and to activate timer mode. The parking lights flash four times, and after a 1 second delay, the engine starts. • To shutdown the engine, press the remote start button . The system remains in timer mode and will continue to start every 3 hours unless cancelled by turning on the ignition or by activating the brake, or neutral safety shutdown wires. • The parking lights flash 4 times indicating timer mode is exited. Important! Timer Mode should be used only in open areas. Never start and run the vehicle in an enclosed space such as a garage or carport. © 2009 Directed Electronics. All rights reserved. 7