Viper 5204 Owner Manual - Page 18
Timer Start, AUX 2, Arm Status - valet mode
View all Viper 5204 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Timer Start* Press and release Activates (or if On, deactivates) Timer Start. The parking lights flash quickly four times for On and slowly four times for Off. The Remote Start LED and beeps play (1 for on, 2 for off) to confirm.. Note System needs to be armed or Timer Start will not start the engine. AUX 2 Press and release AUX Activates (or if On, deactivates) the Aux 2 output. The Aux LED and On tones or Off tones play to confirm. Arm Status Press and hold the button The remote will generate an output using the LED's and beeps/tones to display the systems Arm Status since its last update message or command operation. It will report status via ghost LED's, beeps, and tones as described in this section for Arm, Disarm, Valet mode arm, Valet mode disarm, Sensor Silent arm, Full Silent arm. * See Advance Start under Remote Start Features for details. © 2011 Directed Electronics. All rights reserved. 15