Viper 5204 Owner Manual - Page 28
Full Silent Arm Protection, Sensor Warn-away, Full Trigger, Emergency Override - responder
View all Viper 5204 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Full Silent Arm Protection Sensor Warn-away, Sensor Full Trigger and Point of Entry activations will only send messages to the remote, with parking light flash and siren outputs defeated. Sensor Warn-away When the system sensors detect a Warn-away trigger the siren chirps and parking lights flash for 3 seconds. No messages are sent to the Responder LE remote control for Warn-away triggers. Full Trigger An alarm Full Trigger will sound the siren and flash the parking lights for 30 seconds while sending a Full Trigger message to the remote control. The ghost LED's flash and siren tones play for 30 seconds followed by an alert that consists of 1 long beep per minute for 10 minutes. To stop the output and alert, press a command button to perform a command, or Press the button. Emergency Override The following procedure disarms the system when a programmed remote is not available. Number of presses__________ 1. Turn the ignition On. 2. Press the control button on the Control Center the correct number of times (the default is 1 press). 3. After a few seconds the siren output ceases and the system is disarmed. Note As a precaution, if programmed for Passive Arming or Auto re-arming the system should be placed into Valet Mode until a remote is available . © 2011 Directed Electronics. All rights reserved. 25