Viper 540ESP Owner Manual - Page 17

will turn off. You can also shut down the remote start system by pressing on the brake pedal. You may want to enter the vehicle and drive it without shutting off the motor. It is possible to shut down the remote start and drive the vehicle without shutting down the motor. To shut down the remote start: 1. Disarm the security system (if armed) by pressing . 2. Enter the vehicle and turn the ignition to the ON position. 3. Step on the brake pedal. The remote start system will be shut down when you step on the brake pedal. The vehicle motor, however, will continue to run because the ignition has been turned on. The vehicle will now operate as usual. Valet Take-Over A vehicle equipped with the Valet® Take-Over system can remain running after the key is removed from the ignition. This feature is useful for occasions when you wish to exit the vehicle for short periods of time, but would like to leave the motor running and the climate controls on. To perform Valet® Take-Over, before turning off the engine: 1. Press and release and on the transmitter (or press and release the optional Momentary switch). 2. Turn the ignition key to the OFF position. (The engine will stay running.) 16 © 1999 Directed Electronics, Inc.