Viper 540ESP Owner Manual - Page 34

✂ Cut along dotted line and fold for a quick and easy reference to keep in your purse or wallet. ✂ QUICK REFERENCE GUIDE: Arming s To arm, press . When the system arms, you will hear a short chirp, and the parking lights will flash once. Arming while driving s To arm the system while driving, press on your transmitter while the vehicle is running. The system will chirp once and then once more to indicate that the ignition is on. Disarming s To disarm, press will flash twice. . You will hear two chirps, and the parking lights High security disarm s For high security disarm, press on your transmitter and the siren will stop sounding. To completely disarm the security system, press again and the system will chirp 4 or 5 times (reporting the trigger). Disarming without a transmitter s Turn on the ignition. Press the Valet® switch within 15 seconds. The system should now disarm. If it does not, you may have waited too long, so turn the ignition off and on and try again. Silent Mode™ s Pressing briefly before arming or disarming will eliminate the con- firmation chirp(s) for that one operation only. Panic Mode s Press for 1 second, and you will enter Panic Mode. The siren will sound and the parking lights will flash for 30 seconds. To stop Panic Mode at any time, press on the transmitter again. To remote start the vehicle s Press and simultaneously. The parking lights will turn on (if connected) and the vehicle will start and run for the programmed peri- od of time. To disable the remote start system s To disable the remote start, move the shutdown toggle switch to the OFF position. Location of Valet® switch Number of Valet® switch pulses for disarming © 1999 Directed Electronics, Inc. 33