Viper 540ESP Owner Manual - Page 19

To exit Timer Mode, LOCATION OF SHUTDOWN SWITCH

Get Viper 540ESP PDF manuals and user guides View all Viper 540ESP manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

To exit Timer Mode: Timer Mode can be exited by turning the ignition on with the key any time that the vehicle engine is not running. You can also exit Timer Mode using the transmitter by following these steps: 1. Start the engine by pressing and on the transmitter simultaneously. 2. Press and release on the transmitter. 3. Within two seconds, press and release and on the transmitter again. 4. The vehicle engine will shut down and the parking lights will flash four times to confirm that Timer Mode has been exited. If the vehicle has already been remote started, you may skip Step One. Disabling the Remote Start System This feature allows your system's remote start unit to be temporarily disabled to prevent the vehicle from being remote started accidentally. This feature is useful if the vehicle is being serviced or stored in an enclosed area. To disable the remote start, move the supplied shutdown toggle switch to the OFF position. The switch can be installed in a location of your choice. Check with your installer for recommended locations. LOCATION OF SHUTDOWN SWITCH 18 © 1999 Directed Electronics, Inc.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
18
©
1999 Directed Electronics, Inc.
To exit Timer Mode:
Timer Mode can be exited by turning the ignition on with the key
any time that the vehicle engine is not running. You can also exit
Timer Mode using the transmitter by following these steps:
1.
Start the engine by pressing
and
on the transmitter
simultaneously.
2.
Press and release
on the transmitter.
3.
Within two seconds, press and release
and
on the
transmitter again.
4.
The vehicle engine will shut down and the parking lights will
flash four times to confirm that Timer Mode has been exited.
If the vehicle has already been remote started, you may skip
Step One.
This feature allows your system's remote start unit to be tem-
porarily disabled to prevent the vehicle from being remote started
accidentally. This feature is useful if the vehicle is being serviced
or stored in an enclosed area. To disable the remote start, move
the supplied shutdown toggle switch to the OFF position. The
switch can be installed in a location of your choice. Check with
your installer for recommended locations.
LOCATION OF SHUTDOWN SWITCH
_________________________
Disabling the Remote Start System