Home » Vizio Manuals » Flat Panel Televisions » Vizio E260VA » Manual Viewer

Vizio E260VA E190VA User Manual - Page 23

Adjusting the TV Settings for Use with A PC

Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

E190VA / E220VA / E260VA 5 Adjusting the TV Settings for Use with A PC Your TV can be used to display output from a home computer using the RGB port. These settings are only available when viewing content from the RGB port. To adjust the PC settings: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight the TV icon and press MENU/OK. The TV Settings menu is displayed. 3. Use the Arrow buttons to highlight PC Setting and press MENU/OK. 4. Use the Arrow and MENU/OK buttons to adjust each of the following options: Horiz. Position - Adjust the horizontal (left/right) position of the picture. Vertical Position - Adjust the vertical (up/down) position of the picture. Fine Tune - Adjust the synchronization between the PC and the TV. Increase or decrease this setting if you see "waviness" or a blurry picture. If you would like the TV to automatically adjust the picture for best quality, select Auto Sync and press MENU/OK. 15

Section	Page
Installing the TV	9
Inspecting the Package Contents	9
Installing the TV	9
Installing the TV Stand	9
Installing the TV on a Wall	10
Controls and Connections	11
Front Panel	11
Left Side Panel	11
Right Side Panel	11
Rear Panel	12
Remote Control	12
Replacing the Batteries	13
Completing the First-Time Setup	14
Connecting Your Devices to the TV	15
Before You Begin	15
Connecting Your Devices	15
Adjusting the TV Settings	17
Changing the Input Source	17
Customizing and Removing Input Names	17
Customizing Input Names	17
Removing Unused Inputs from the Input List	18
Setting Up Channels	18
Changing the Signal Source	18
Customizing the Master Channel List	19
Scanning for New or Additional Channels	19
Scanning for Channels	20
Customizing Channel Names	20
Changing the On-Screen Menu Language	21
Setting the TV’s Date and Time	21
Setting the Time Zone	21
Adjusting the Time for Daylight Savings	22
Enabling or Disabling Automatic Date and Time Updates	22
Setting the Date and Time	22
Adjusting the TV Settings for Use with A PC	23
Using the Other Menu Settings	24
Navigating the On-Screen Menu	24
Setting the Sleep Timer	24
Viewing a USB Photo Slideshow	24
Customizing the Photo Display Screen	25
Setting the Screen Aspect Ratio	26
Adjusting the Audio Settings	27
Enabling or Disabling SRS TruSurroundHD	27
Enabling or Disabling SRS TruVolume	28
Adjusting the Equalizer Settings	28
Adjusting Bass and Treble Levels	29
Adjusting the Speaker Balance	29
Enabling or Disabling the Built-In Speakers	30
Selecting the Digital Output Mode	30
Changing the Audio Language	31
Resetting the Audio Settngs	31
Adjusting the Picture Settings	32
Changing the Picture Mode	32
Adjusting the Noise Reduction Setting	33
Enabling or Disabling Fast Response	33
Enabling or Disabling the Ambient Light Sensor	33
Resetting the Picture Settings	34
Setting the Parental Controls	34
Enabling or Disabling Program Ratings	34
Locking and Unlocking Channels	34
Blocking and Unblocking Content by Rating	35
Changing the Parental Control Passcode	35
Resetting the Content Locks	35
Viewing System Info and Resetting to Factory Defaults	36
Displaying System Information	36
Restoring the TV to the Factory Default Settingss	36
Restarting the Setup App	36
Setting Up Closed Captioning	37
Changing the Appearance of Digital Closed Captions	37
Troubleshooting & Technical Support	38
The TV displays “No Signal.”	38
There is no power.	38
The power is on, but there is no image on the screen.	38
There is no sound.	38
The colors on the TV don’t look right.	38
The buttons on the remote aren’t working.	38
The image quality is not good.	38
The picture is distorted.	38
The display image does not cover the entire screen.	39
The TV has pixels (dots) that are always dark or always lit.	39
I see “noise” or static on the screen.	39
When I change input source, the volume changes.	39
When I change input source, the display image changes size.	39
Specifications	40
Limited Warranty	42
ON PARTS AND LABOR	42
Parts and Labor	42
Type of Service	42
Limitations and Exclusions	42
Personal Data	42
Zero Bright Pixel Defect Guarantee	42
Legal & Compliance	43
FCC Class B Radio Interference Statement	43
Notice	43
FCC warning	43
Caution	43