Home » Vizio Manuals » Flat Panel Televisions » Vizio E260VA » Manual Viewer

Vizio E260VA E190VA User Manual - Page 30

MENU/OK, Arrow, Audio, Speakers, Right/Left Arrow, Digital Audio Out, Force PCM

Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

6 E190VA / E220VA / E260VA Enabling or Disabling the Built-In Speakers Using this menu option, you can turn the built-in speakers on or off. This is often used when the TV is connected to a home audio system. To enable or disable the built-in speakers: 1. Press the MENU/OK button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons to highlight Audio and press MENU/OK. 3. Use the Arrow buttons to highlight Speakers and press MENU/OK. 4. Press the Right/Left Arrow buttons to select On or Off and press EXIT. Selecting the Digital Output Mode Using this menu option, you can force the TV to downsample unsupported audio formats to PCM audio. You may want to use this option if you have an older audio receiver connected to the TV. If you are unfamiliar with audio formats, or your TV is not connected to an audio receiver, VIZIO recommends you set this option to Auto. This option only affects audio output from the coaxial or optical port. To select the digital output mode: 1. Press the MENU/OK button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons to highlight Audio and press MENU/OK. 3. Use the Arrow buttons to highlight Digital Audio Out and press MENU/OK. 4. Use the Arrow buttons to highlight Auto or Force PCM and press MENU/OK. 5. Press EXIT. 22

Section	Page
Installing the TV	9
Inspecting the Package Contents	9
Installing the TV	9
Installing the TV Stand	9
Installing the TV on a Wall	10
Controls and Connections	11
Front Panel	11
Left Side Panel	11
Right Side Panel	11
Rear Panel	12
Remote Control	12
Replacing the Batteries	13
Completing the First-Time Setup	14
Connecting Your Devices to the TV	15
Before You Begin	15
Connecting Your Devices	15
Adjusting the TV Settings	17
Changing the Input Source	17
Customizing and Removing Input Names	17
Customizing Input Names	17
Removing Unused Inputs from the Input List	18
Setting Up Channels	18
Changing the Signal Source	18
Customizing the Master Channel List	19
Scanning for New or Additional Channels	19
Scanning for Channels	20
Customizing Channel Names	20
Changing the On-Screen Menu Language	21
Setting the TV’s Date and Time	21
Setting the Time Zone	21
Adjusting the Time for Daylight Savings	22
Enabling or Disabling Automatic Date and Time Updates	22
Setting the Date and Time	22
Adjusting the TV Settings for Use with A PC	23
Using the Other Menu Settings	24
Navigating the On-Screen Menu	24
Setting the Sleep Timer	24
Viewing a USB Photo Slideshow	24
Customizing the Photo Display Screen	25
Setting the Screen Aspect Ratio	26
Adjusting the Audio Settings	27
Enabling or Disabling SRS TruSurroundHD	27
Enabling or Disabling SRS TruVolume	28
Adjusting the Equalizer Settings	28
Adjusting Bass and Treble Levels	29
Adjusting the Speaker Balance	29
Enabling or Disabling the Built-In Speakers	30
Selecting the Digital Output Mode	30
Changing the Audio Language	31
Resetting the Audio Settngs	31
Adjusting the Picture Settings	32
Changing the Picture Mode	32
Adjusting the Noise Reduction Setting	33
Enabling or Disabling Fast Response	33
Enabling or Disabling the Ambient Light Sensor	33
Resetting the Picture Settings	34
Setting the Parental Controls	34
Enabling or Disabling Program Ratings	34
Locking and Unlocking Channels	34
Blocking and Unblocking Content by Rating	35
Changing the Parental Control Passcode	35
Resetting the Content Locks	35
Viewing System Info and Resetting to Factory Defaults	36
Displaying System Information	36
Restoring the TV to the Factory Default Settingss	36
Restarting the Setup App	36
Setting Up Closed Captioning	37
Changing the Appearance of Digital Closed Captions	37
Troubleshooting & Technical Support	38
The TV displays “No Signal.”	38
There is no power.	38
The power is on, but there is no image on the screen.	38
There is no sound.	38
The colors on the TV don’t look right.	38
The buttons on the remote aren’t working.	38
The image quality is not good.	38
The picture is distorted.	38
The display image does not cover the entire screen.	39
The TV has pixels (dots) that are always dark or always lit.	39
I see “noise” or static on the screen.	39
When I change input source, the volume changes.	39
When I change input source, the display image changes size.	39
Specifications	40
Limited Warranty	42
ON PARTS AND LABOR	42
Parts and Labor	42
Type of Service	42
Limitations and Exclusions	42
Personal Data	42
Zero Bright Pixel Defect Guarantee	42
Legal & Compliance	43
FCC Class B Radio Interference Statement	43
Notice	43
FCC warning	43
Caution	43