Vizio E420i-B0 Download - Page 11
Installing the TV on a Wall, Place the TV face-down on a clean, flat, stable surface. - screw size
View all Vizio E420i-B0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
To install the base: 1. Align the neck piece with the bottom of the TV and slide it into place as shown. 2. Using a Phillips screwdriver, tighten three (3) M4 12mm Phillips screws into the center of the neck piece using a Phillips screwdriver to secure it to the TV. 3. When you are finished, place the TV on a stable, level surface. 1 Installing the TV on a Wall To mount your TV on a wall, you will need a wall mount. Consult the information below to find the appropriate mount for your TV model: Installing a TV on a wall requires lifting. To prevent injury or damage to the TV, ask someone to help you. E420i-B0 Screw Size: Hole Pattern: Weight w/o Stand: M4 200mm (V) x 200mm (H) 16.0 lbs Be sure the mount you choose is capable of supporting the weight of the TV. After you have determined that you have the correct mount for your TV, you can begin the installation. To install your TV on a wall: 1. Disconnect any cables connected to your TV. 2. Place the TV face-down on a clean, flat, stable surface. Be sure the surface is clear of debris that can scratch or damage the TV. 3. Remove the base by loosening and removing the screws. 4. Attach your TV and wall mount to the wall, carefully following the instructions that came with your mount. Use only with a UL-listed wall mount bracket rated for the weight/load of this TV. 5