Vtech CS6529-3 User Manual - Page 8
Battery charging
![]() |
View all Vtech CS6529-3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Getting started Battery charging Once you have installed the battery, the screen indicates the battery status (see the table below). • For best performance, keep the handset in the telephone base or charger when not in use. • The battery is fully charged after 11 hours of continuous charging. • If you place the handset in the telephone base or the charger without plugging in the battery, the screen displays NO BATTERY. Battery indicators The screen is blank, or displays Put in charger and flashes. The screen displays Low battery and flashes. The screen displays HANDSET X. Battery status The battery has no or very little charge. The handset cannot be used. The battery has enough charge to be used for a short time. The battery is charged. Action Charge without interruption (at least 30 minutes). Charge without interruption (about 30 minutes). To keep the battery charged, place it in the telephone base or charger when not in use. When the battery is fully charged, you can expect the following performance: Operation While in handset use (talking*) While in speakerphone mode (talking*) While not in use (standby**) Operating time Up to 7 hours Up to 3.5 hours Up to 5 days * Operating times vary depending on your actual use and the age of the battery. ** Handset is not charging or in use. After you install your telephone or power returns following a power outage, the handset will prompt you to set the date and time. For instructions, see Set date and time on page 13. To skip setting, press CANCEL. Date: MM/DD/YY ECO
![](/manual_guide/products/vtech-cs65294b-user-manual-7a6d6b6/8.png)