Vtech CS6729-5 User Manual - Page 33
Set remote access code, Call screening
View all Vtech CS6729-5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
2. When the system plays your announcement, enter the two-digit security code. 3. You can enter one of the following remote commands. Command Description 1 Play all messages. 2 Play new messages. 3 Delete the current message (during playback). 33 Delete all old messages. 4 Repeat the current message (during playback). 5 Stop. *5 Hear a list of remote commands. 6 Skip to the next message (during playback). *7 Record a new announcement. 8 End the call. 0 Turn the answering system on or off. 4. Hang up or press 8 to end the call. NOTES • If you do not press any keys after you enter the remote access code, all new messages play. If there are no new messages, all old messages play. • Once the new messages have played, the telephone announces the help menu options. If you do not press any key within 20 seconds, the remote access call automatically disconnects. • When the answering system memory is full, the telephone announces, "Memory is full. Enter the remote access code." Set remote access code A two-digit security code is required to access the answering system remotely from any touch-tone telephone. The preset code is 19. You can set the code from 00 to 99. 1. Press MENU when the phone is not in use. 2. Press or to scroll to Answering sys then press SELECT. 3. Press or to scroll to Ans sys setup then press SELECT. 4. Press or to scroll to Remote code, and then press SELECT. 5. Use the dialing keys to enter a two-digit number. -ORPress or to scroll to a desired two-digit number. 6. Press SELECT to save and you hear a confirmation tone. Call screening To screen a call at the telephone base: If the answering system and call screening are turned on, the announcement and the incoming message broadcast at the telephone base while the call is answered by the answering system. Options while a message is being recorded: • Press /VOL/ to adjust the call screening volume. • Press /VOL/ to temporarily turn on the call screening if the call screening is set to off. • Press /PLAY/STOP to temporarily turn on or off the call screening. 27