Vtech CS6929 User Manual - Page 15
Before use, Set date and time, Set answering system through, voice guide, Check for dial tone
View all Vtech CS6929 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Before use Check for dial tone After you install your telephone or power returns following a power outage and battery depletion, the handset will prompt you to set the date and time, and the answering system through voice guide. Set date and time NOTE • Make sure you set the date and time including the year correctly; otherwise the answering system does not announce the correct day of the week for your recorded messages time stamp. 1. Use the dialing keys (0-9) to enter the month (MM), date (DD) and year (YY). Then press SELECT. 2. Use the dialing keys (0-9) to enter the hour (HH) and minute (MM). Then press or to choose AM or PM. 3. Press SELECT to save. After the setting for the date and time, the handset will display Voice guide to... and set up Ans sys? alternatively. Set answering system through voice guide This feature assists you to do the basic setup of the answering system. You can follow the voice guide to record your own announcement, set the number of rings and the message alert tone. 1. Press SELECT to start the voice guide for the answering system setup. You hear the voice prompt "Hello! This voice guide will assist you with the basic setup of your answering system." 2. Setup your answering system by inputting the designated numbers as instructed in the voice guide. Press . If you hear a dial tone, the installation is successful. If you do not hear a dial tone: • Make sure the installation procedures described above are properly done. • It may be a wiring problem. If you have changed your telephone service to digital service from a cable company or a VoIP service provider, the telephone line may need to be rewired to allow all existing telephone jacks to work. Contact your cable/VoIP service provider for more information. Operating range This cordless telephone operates with the maximum power allowed by the Federal Communications Commission (FCC). Even so, this handset and telephone base can communicate over only a certain distance - which can vary with the locations of the telephone base and handset, the weather, and the layout of your home or office. When the handset is out of range, the handset displays Out of range or no pwr at base. If there is a call while the handset is out of range, it may not ring, or if it does ring, the call may not connect well when you press . Move closer to the telephone base, and then press to answer the call. If the handset moves out of range during a telephone conversation, there may be interference. To improve reception, move closer to the telephone base.