Vtech DigiArt Creative Easel User Manual - Page 9
Transform From Drawing Table, To Easel
 |
View all Vtech DigiArt Creative Easel manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
TRANSFORMATION INSTRUCTIONS Step 3: Snap A2 into place and tighten the center screw by pushing it in and turning it clockwise to fix it in position. Then tighten the left and right screws on the SUPPLIES TRAY (B) by turning them clockwise. The DRAWING TABLE is now ready to use and the LED SCREEN AREA will rotate automatically. TRANSFORM FROM DRAWING TABLE TO EASEL Step 1: Make sure the unit is turned OFF before transforming. Loosen the left and right screws on the SUPPLIES TRAY (B) by turning them counterclockwise. Then, loosen the center screw by pushing in and turning it counterclockwise. 9
-
1 -
2
-
3
-
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15
-
16
-
17
 |
 |
9
Step 3:
Snap
A2
into place and tighten the center screw by pushing it in and
turning it clockwise to fix it in position. Then tighten the left and right
screws on the
SUPPLIES TRAY (B)
by turning them clockwise. The
DRAWING TABLE
is now ready to use and the
LED SCREEN AREA
will rotate automatically.
TRANSFORM FROM DRAWING TABLE
TO EASEL
Step 1:
Make sure the unit is turned
OFF
before transforming. Loosen the
left and right screws on the
SUPPLIES TRAY (B)
by turning them
counterclockwise. Then, loosen the center screw by pushing in and
turning it counterclockwise.
TRANSFORMATION INSTRUCTIONS