Vtech Language Lab Laptop User Manual - Page 4

TO REPLACE THE BACKUP BATTERY 1. Make sure the unit is OFF. 2. Using a small screwdriver, loosen the battery cover. 3. Insert 2 "AA" size batteries as illustrated. 4. Close the battery cover and tighten the screws to secure it. STANDARD FOR BATTERY TOYS • Do not try to recharge non-rechargeable batteries; • Rechargeable batteries are to be removed from the toy before being charged; • Rechargeable batteries are only to be charged under adult supervision; • Do not mix different types of batteries; Do not mix new and used batteries; • Only use batteries of the recommended or equivalent type; • Always insert batteries properly matching the plus (+) and minus (-) signs; • Batteries that have run out of energy must be removed from the toy; • Do not short-circuit the supply terminals; • Do not use more batteries than recommended; • Remove batteries from the toy if it will not be used for an extended period of time. • Do not dispose of batteries in fire. Important: While replacing the backup battery, the 4 "AA" size batteries must be kept in the unit. Otherwise, you will lose any saved information. INSTRUCTIONS & ACTIVITIES DC ADAPTOR Use a VTech® adaptor or any other standard adaptor that complies with EN61558 AC-DC 9V 300mA center-positive adaptor. CONNECTING THE ADAPTOR 1. Make sure the unit is OFF. 2. Locate the adaptor jack on the left side of the unit. 3. Insert the adaptor plug into the unit's adaptor jack. 4. Plug the adaptor into a wall outlet. 5. Turn the unit ON. NOTE: When the toy is not going to be in use for an extended period of time, unplug the adaptor. STANDARD FOR TOYS WITH ADAPTORS • The toy is not intended for use by children under 3 years old; • Use only the recommended adaptor with the toy; 3