Vtech TL76108 User Manual - Page 12
Charger installation & data port use - base
![]() |
UPC - 650530016363
View all Vtech TL76108 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Getting started Charger installation & data port use Plug the handset charger power adapter into a power outlet not controlled by a wall switch. IMPORTANT INFORMATION 1. Use only the power adapters supplied with this product or equivalent. To order a replacement power adapter, visit our website at www.telephones.att.com, or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. 2. These power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-thetable or cabinet outlet. You may connect a fax machine or modem through the DATA port located at the back of the telephone base (as shown below). For installation with 2-line jack, telephone line should be plugged into LINE 1/L1+L2 jack (page 6); for installation with 1-line jack, telephone line jack should be plugged into LINE 2 jack (page 7); for installation with separate line, data will be transmitted through LINE 2 jack (page 8). Use DATA port at the back of the telephone to connect to the fax or modem if desired. DATA
![](/manual_guide/products/vtech-tl76108-user-manual-6d2a737/12.png)