Vtech TL76108 User Manual - Page 31

Telephone operation HANDSET I RDL MENU CID MENU softkey DIRECTORY MAILBOXES SETUP HANDSET REGISTER OK RINGERS LOW BATT TONE KEYPAD TONE CONTRAST SET L1/INTERCOM VOL L2 VOLUME L1 MELODY L2 MELODY SET L1 VOLUME - OK + NOTES: 1. If more than one handset is installed, each handset will ring when there is an incoming call unless the volume is turned off. Pressing OFF/CLEAR on one handset will only silence the ringer of that particular handset. 2. The ringer volume level also determines the ringer levels of intercom calls (pages 22-23). If the handset ringer volume level is set to off, that handset ringer is silenced for all incoming and intercom calls. Handset settings Ringer volume Using this menu, you can set the handset ringer volume level or turn the ringer off. To adjust the RINGER VOLUME: 1. Press the MENU softkey when the phone is not in use to enter the feature menu. 2. Press the or softkey to scroll to the SETUP HANDSET menu, then press the OK softkey. 3. Press the SET softkey to select RINGERS menu. 4. To set the volume for line 1 or intercom, the SET softkey to choose L1/INTERCOM VOL. -ORTo set the volume for line 2, press the or softkey to choose L2 VOLUME. Press the SET softkey. 5. Press the + or - softkey to increase or decrease the ringer volume. -ORPress the /VOLUME key to increase the volume. After it reaches the maximum setting, the next press will take the volume level back to the minimum setting. 6. Press the OK softkey to save your preference. Temporary ringer silencing Press OFF/CLEAR on a handset or CLEAR on the telephone base while the telephone is ringing to silence the ringer temporarily. This will silence the ringer without disconnecting the call. The next incoming call will ring normally at the preset volume. 28