Vtech TL76108 User Manual - Page 28

Telephone operation Call transfer using intercom On a cordless handset: Use the intercom feature to transfer an outside call to the telephone base or a cordless handset in the system. NOTES: 1. If the called handset or telephone base is not answered within 30 seconds, the outside call will return to the calling handset and be put on hold. If the call is not resumed in five minutes, the calling handset will ring and the screen will display CALL ON HOLD RING BACK! When it rings back if the call is not answered in 30 seconds, the call will be ended. 2. Pressing OFF/CLEAR on the handset or CLEAR on the telephone base will temporarily silence the intercom ringer. 1. While on an outside call, press /X-FER/INTERCOM on the handset. 2. Press the or softkey to choose the desired handset and press the OK softkey, or enter the handset number (e.g. 1 for handset 1). The called handset will ring, and its screen will show TRANSFER FROM HANDSET X. -OR- Press the or softkey to choose BASE and press the OK softkey, or �e�n�t�e��r 0 to transfer the outside call to the telephone base. The telephone base will ring, and its screen will show TRANSFER FROM HANDSET X. 3. On the ringing handset, press LINE 1/FLASH or LINE 2/FLASH, /X-FER/INTERCOM or SPEAKER to answer the transferred call. -OR- On the ringing telephone base, press /�IN�T�E�R�C�O�M�/TRANSFER or SPEAKER, or lift the corded handset to answer the transferred call. If you want to intercom the desired handset or telephone base before the outside call is transferred, press the HOLD softkey to put the outside call on hold and follow the steps for Intercom on page 22. At the end of the intercom call, resume the outside call by pressing the corresponding line button and follow the steps on this page to transfer the call. 25