Waring FP1000 Instruction Manual - Page 15
pulsing/on-off
View all Waring FP1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
USE INSTRUCTIONS FOR ACCESSORY DISCS IN THE CONTINUOUS FEED CHUTE • Assemble the bowl and accessory disc as instructed in the section titled "Assembling the Batch Bowl Parts", or assemble the continuous feed chute and accessory disc as instructed in the section titled "Assembling the Continuous Feed Chute Parts". • If required by your processing task, either: Stack the feed tube with food product and position the large food pusher at the top of the stack, or Place the large food pusher into the feed tube and remove the small feed pusher to use the smaller feed chute located inside the large food pusher. This is described above. Stack food items in the small food chute. Position small food pusher at the top of the stack. • Be sure the unit is off by pushing and releasing the PULSE/OFF lever. • Insert the power cord plug into a properly grounded outlet of the correct voltage. • Use the "ON" switch for continuous processing, or the PULSE/OFF lever for pulsing/on-off operation. • Feed the items to be processed at a steady rate into the feed tube, using the food pusher to push the food down. The same technique is used whether you choose to use the large pusher or the small pusher. Avoid excessive force when using either one of the food pushers. Too much force may cause food items to jam in the feed tube or damage the machine. ALWAYS USE THE LARGE FOOD PUSHER TO PUSH FOOD ITEMS DOWN INTO THE LARGE FEED TUBE. In the same way, ALWAYS USE THE SMALL FOOD PUSHER TO PUSH FOOD ITEMS DOWN INTO THE SMALL FEED TUBE. NEVER PUT FINGERS, SPATULAS, OR OTHER UTENSILS INTO THE LARGE FEED TUBE OR THE SMALL FEED TUBE CHANNEL. • Never use the small food pusher in the large feed tube. • When the bowl is full and/or you have finished your processing task with the bowl or continuous feed chute, press the PULSE/OFF lever and let the processing disc come to a complete stop. Unplug the unit. NEVER STOP THE FOOD PROCESSOR BY REMOVING THE PLUG FROM THE OUTLET OR BY REMOVING THE COVER. ALWAYS STOP THE UNIT BY PRESSING THE "PULSE/OFF" SWITCH. • Follow disassembly instructions for the bowl and continuous feed chute as appropriate. These are described in the section titled "Disassembling the Batch Bowl Parts" or the section titled "Disassembling the Continuous Feed Chute Parts." When processing, it is recommended that the machine be operated on a 50% duty cycle, such as 5 minutes on / 5 minutes off. This can be accomplished by processing for 5 minutes, then doing 5 minutes of food preparation. Please remember to turn off the machine when not in use. 14