Waring WDH10 Instruction Manual - Page 6
Before Your First Use, Operating Instructions
View all Waring WDH10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
BEFORE YOUR FIRST USE 1. Unpack the dehydrator with care. 2. Wash all of the trays in warm, soapy water. Rinse well and dry completely. 3. W ipe the dehydrator base with a clean and dry, soft cloth or sponge. Never immerse housing, plug or cord in water or any other liquids. OPERATING INSTRUCTIONS 1. Position the dehydrator so that the air vents at the rear of the dehydrator are not blocked. Keep the dehydrator at least 3 feet away from any wall to allow for proper air circulation. DO NOT operate the dehydrator on or near flammable surfaces such as carpeting. CAUTION: DO NOT block the intake holes in the back of the food dehydrator or the exhaust vent above the door on the front of the unit. 2. Wash and slice food as needed. 3. Arrange food on trays; do not overload trays. Trays can accommodate a variety of food sizes with small adjustments. 4. Plug the dehydrator into a standard 120V wall outlet and press power ON/OFF to turn machine on. To turn off, hold the POWER button for 3 seconds. 5. Temperature setting defaults to 140°F. Timer defaults to 8 hours. 6. T o change the temperature, use the plus and minus arrows below temperature display. Hold down arrow for fast scroll. 7. Set the timer using the plus and minus arrows below timer display. 8. Press START. Allow the food to dry for the recommended length of time (drying time depends on the food type). 9. Monitor the food while it is dehydrating and check it for desired doneness. Leave the pieces that are not yet done in the dehydrator and monitor them until done. 10. When the timer elapses, the machine will beep once and turn heat off. Note that the fan will continue to run for one minute to help cool the unit. Then the unit will shut down completely. To turn off, hold the POWER button for 3 seconds. 6