Waring WDM360T Instruction Manual - Page 4

The drink mixer can be operated without engaging the ON/OFF cup actuator by using the PULSE toggle switch. The PULSE switch will operate at whatever speed the 3-speed switch is set to. The PULSE switch will operate only while pressed forward or backward. Keep a firm grip on the cup while using PULSE . Your Waring® Commercial Drink Mixer is supplied with 2 agitators, 1 standard and 1 "butterfly" (with the movable flaps), per spindle. To switch agitators, simply hold the spindle shaft with one hand and turn the agitator in a clockwise direction. This will loosen the screw, and you can unscrew to remove. Insert replacement agitator and screw bottom screw back in. Tighten by turning the agitator in a counterclockwise direction. Use only a standard metal mixing cup with the standard agitator. TIMER UNIT INSTRUCTIONS To operate your drink mixer with the timer, you must follow the following instructions: 1. When plugging in the unit, the timer(s) will automatically read R0:00. 2. NOTE: To turn the timer off at any point, press the arrow three times in rapid fashion. To turn the unit back on, tap the or arrow once and the unit will display R0:00, or any previously set time. 3. You can reset your time at any point by pressing and holding the and arrows simultaneously for 3 seconds. 4. There are two ways to set the timer for your commercial drink mixer: Setting the timer manually: 1) Press and hold the arrow for 3 seconds and the unit will enter into time-setting mode S0:00. 2) Once the timer is on and you have activated setting mode, you can set the timer using the and arrows. (HINT: holding the arrow buttons down will allow you to count up in 10-second increments.) Unit will display S (time selected). 3) When you've reached your desired time, the timer will automatically set after 3 seconds. 4