Waring WDM360T Instruction Manual - Page 5

4) The timer will begin to count down when unit is actuated by the mixing cup. NOTE: Timer will not count down when using the PULSE function. 5) Once timer is set, hold the arrow for 3 seconds to enter back into time-setting mode and you can adjust the time starting from previous set time. 6) Time can be reset at any time by pressing both and arrows simultaneously for 3 seconds. Timer will read R0:00. Setting the timer using assisted mode: 1) To set the timer using assisted mode, your timer must be on. If the timer is not on, tap the or arrow once to activate. 2) When the timer is on, reading R0:00, mount the mixing cup onto the drink mixer and the unit will begin to count up. 3) Once your mixture has reached its desired consistency, remove the mixing cup, press and hold the arrow for 3 seconds. This will become your set time. (NOTE: If cup is placed back on unit to re-actuate before the 10-second setting time has elapsed, the counter will continue to count up.) 4) The timer will begin to count down from the set time when unit is actuated by the mixing cup. NOTE: Timer will not count down when using the PULSE function. 5) The set time can be changed manually, if needed, by holding for 3 seconds and entering into the time-setting mode. This will allow you to adjust the time starting from the previous set time. 6) Time can be reset at any time by pressing both and simultaneously for 3 seconds. Timer will read R0:00. 5. When the set time elapses, the motor will automatically shut off, the timer will flash 0:00, and then automatically return to set time. 6. If mixing cup is removed before the set time elapses, the cup must be returned within 10 seconds to continue mixing for the time remaining. If the cup is not replaced within 10 seconds, the timer will return to the previously set time. 5