Weber Genesis 1000 LP Owner Manual - Page 22
Complete accessory installation
View all Weber Genesis 1000 LP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Step 23 Complete accessory installation You will need: Warm-Up Basket, warming rack, work table, accessory rack, three tubing plugs, thermometer and a hammer. Insert one end of the Weber Warm-Up Basket into the hole in the right end of the lid and the other end into the slot in the left end of the lid. Figure 30 (a). Set the warming rack into the slots at the rear of the cooking box. Figure 30 (b). Set the work table onto the left side rails. Figure 30 (c). Set the accessory rack in place between the two frame connectors. Figure 30 (d). Insert the thermometer into its holder. Figure 30 (e). Insert the tubing plugs into the ends of the frame. To fully seat the plugs, you may have to tap them lightly with a hammer. Figure 30 (f). (a) (b) (c) (e) (f) (d) Figure 30 ƽCAUTION: To keep the barbecue stationary, the tabs on the locking casters should be in the down position. 22