Weber Genesis 1000 LP Owner Manual - Page 32
Crossover Ignition System Operations
View all Weber Genesis 1000 LP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
i) Reinstall the Spider Stopper Guards. Slightly rotate the Spider Stopper Guards so that the seams are in line with the Venturi fins. There should be no gaps in the seams or in the fit around the burners and valves. Figure 19. Venturi fin Check fit around valve Crossover Ignition System Operations If the Crossover Ignition System fails to ignite the Front burner, light the Front burner with a match. If the Front burner lights with a match, then check the Crossover Ignition System. s Check that both the white and black ignition wires are attached properly. Figure 20. Check fit around burner Figure 19 ƽCAUTION: If the Spider Stopper Guards do not fit tightly, contact Weber-Stephen Customer Service. ƽWARNING: After reinstalling the gas lines, they should be leak checked with a soap and water solution before using the barbecue. See Step"Check for gas leaks". White wire Black wire Figure 20 s Check that the Crossover Ignition button pushes the igniter (button) down, and returns to the up position. s Check to see if the igniter is loose in the frame. Tighten if necessary; See Step "Install igniter" for correct procedure. If the Crossover Ignition System still fails to light, contact Weber-Stephen Customer Service. 32